Dayton contractor website audit guide showing common metadata and SEO problems

2026-09-14 · By Reuben Lopez · Estimated 12 min read

I Audited 7 Dayton Contractor Websites. Here's What Broke.

Over the past two weeks I went through the websites of seven contractors around Centerville, Kettering, Miamisburg, and Springboro — roofers and electricians, all of them independent, all of them with real reviews and real customers. Not a formal study. Just reading the code behind sites belonging to businesses that seemed to be doing well.

On six of the seven, the visible website was fine and the part search engines actually read was wrong. Not broken in a way anyone would notice from the front end. Broken in a way that only shows up when a search engine or an AI tool tries to figure out what the business does and where it does it.

This piece is for the owner who has a website they paid for, reviews they earned, and a nagging sense that neither one is producing the phone calls it should. If you're a marketer looking for technical SEO tactics, this isn't that.

The short version

Across seven sites:

  • Four had the business operating under two or more different names across their own site, their Google listing, and third-party directories.
  • Three had missing, cut-off, or unusable meta descriptions — including one that literally stopped mid-word.
  • Two listed ten or more service cities as plain text in a footer, with no page for any of them.
  • Two had a growing service line — solar, EV charger installation — that appeared nowhere in the part of the site search engines read, while the established service took every title tag.
  • One was still running the demo city that came with its website template. A Centerville business whose page title advertised a different state.
  • One was on a website platform that is being wound down underneath them, on code written in 2006.

Every one of these businesses is well run. That's the part worth sitting with.

What "under the hood" actually means

Every web page has two layers.

The layer you see: photos, service descriptions, your phone number, a map of your service area.

The layer you don't: a block of code at the top of the page called the head section. It holds the page's title, a short description, a declaration of which web address is the official one, and — sometimes — structured data that spells out what kind of business this is, where it's located, and what it offers.

Customers never see the second layer. Google, Bing, ChatGPT, and Perplexity read almost nothing but the second layer when deciding what a page is about.

If you're an electrician: the visible site is the wiring, and the head section is the label on the panel. You can wire a panel perfectly and label every breaker wrong. Everything works fine right up until someone else has to read the labels.

That's the failure mode on most of these sites. Good wiring. Wrong labels.

Problem 1: The business has more than one name

This was the most common finding, and the most damaging.

One roofing company had changed its name after a rebrand. The new site was genuinely well built — new name throughout, clear service pages, good structure. But the old brand was still alive in six other places: an old version of the site still being served on a subdomain, a Better Business Bureau profile carrying the old name and a phone number from a different area code, a MapQuest listing with an address they had moved out of, a Yelp entry pointing at the retired web address, a HomeAdvisor profile under the old name showing four reviews, and their own Facebook page linking to two different web addresses in two different posts.

Their Google profile showed fifty-eight reviews. When I asked ChatGPT for the best roofers in their city, it recommended the old name at their address — with the four-review profile attached instead of the fifty-eight.

Another contractor had three versions of the name in play: one on Google, a second in the site's code, and a third on their Facebook page. A third had the raw account handle from their website builder — the kind of thing that looks like businessname1 — set as the official name for every social share.

Why this matters more than it used to. A search engine ranking a list can hedge. An AI tool that names three businesses in an answer has to decide, first, that your business is one business. If the evidence says there might be two companies at one address with different review counts, you're a harder thing to recommend than the competitor with one consistent identity.

How to check yours: search your business name and then search whatever you used to be called. Look at what comes back on Yelp, BBB, MapQuest, HomeAdvisor, Angi, and Facebook. Write down every version of your name, address, and phone you find. If the list has more than one of anything, that's the problem.

Problem 2: The description is missing, cut off, or nonsense

Three of the seven had something wrong with the short description that sits in the head section — the text that often becomes the grey line under your name in search results.

One roofer's homepage had a good one. Every service page had none at all. Blank. When a description is missing, Google will usually improvise a snippet from your body text, but Bing treats the description as a minor ranking signal and doesn't improvise as gracefully — and Bing's index is what ChatGPT's browsing runs on.

Another had a description that ended mid-word: a sentence that stops in the middle of "get." Someone pasted text into their website builder, hit a character limit, and never looked at the result. That same fragment was copied into the tags that control Facebook and text-message previews, so it was broken everywhere at once.

A third had no sentence at all — just city names strung together with commas. That style was normal in 2006 and reads as spam now.

How to check yours: search for your business, look at the grey text under your name. If it's cut off, repeated across every page, or clearly assembled by a machine, it needs writing. Aim for a real sentence, 120 to 160 characters, naming what you do and where.

Problem 3: Your service area is a list, not a set of pages

Two sites listed their service cities in the footer. One had ten. One had thirteen — Springboro, Lebanon, Beavercreek, Bellbrook, Kettering, Miamisburg, and on down.

Neither had a single page for any of those towns. And in both cases, no page title on the site named a city at all.

Naming a town is not the same as competing in it. When someone in Springboro searches for an electrician, the results are full of businesses with a page actually about Springboro — describing work done there, permits there, neighborhoods there. A name in a footer is not in that conversation.

This one stings because the business is already doing the work. They drive to those towns. They just have nothing online that says so in a way a search engine can use.

How to check yours: look at your page titles — the text in the browser tab. Does a city appear in any of them? Then ask whether every town in your footer has a page behind it, or whether it's just a word.

Problem 4: The new part of the business is invisible

Two sites had this, and it's the one owners tend to find most annoying once they see it.

A roofing company had built out a whole solar practice — its own menu section, its own blog category, clearly a real investment. Their page titles, their site's declared identity, and their Google profile mentioned roofing and only roofing. The word "solar" appeared nowhere in the part of the site machines read.

An electrician had a genuinely good page about EV charger installation — Level-2 specifics, the actual charger brands they install, panel capacity evaluation. But their site's identity, top to bottom, said residential electrician. EV charging is the higher-margin, faster-growing half of that business and it was structurally invisible.

The pattern: the established service takes every title tag because that's what the business was when the site was built. The growth service gets a page and nothing else. Then the owner wonders why the new line isn't producing.

Problem 5: Nobody ever changed the template text

One business — an electrical contractor in Centerville, Ohio — had a page title reading "Commercial Electrician Services Seattle."

Seattle. On an Ohio domain, for a company whose visible site includes a service-area map of Montgomery County, ten Ohio cities in the footer, and project photos tagged Centerville.

The template came with a demo city and nobody ever replaced it. And because that same text was set as the Facebook and Twitter share title, it was showing up on Google and anywhere the link got posted.

This business has 159 reviews at 4.9 stars — the strongest reputation of any site I looked at. The only city named anywhere in its code was in a different time zone.

Problem 6: The platform is being retired

One site was built in 2006 on a DIY website builder, and the footer still credits the person who built it that year. The code is HTML 4.01 — a standard from before smartphones existed — and there's no instruction anywhere in it telling a phone how to lay the page out.

That matters because Google now evaluates the mobile version of a site first. For an electrician, where most searches happen on a phone with a problem in front of the searcher, the version being judged is the one that doesn't work.

The platform itself is also being folded into another company, with pieces of the service already discontinued. Twenty years is a good run for a website. But a platform winding down isn't something you can fix from the outside.

What I'd do first if this were my business

In rough order of effort-to-payoff:

  1. Search your own business name and your old one. Write down every version of your name, address, and phone that comes back. Fix the ones you control.
  2. Look at your browser tab on three different pages. Different titles? A city in any of them? Your business name in there somewhere?
  3. Search for yourself and read the grey line. Is it a sentence a human wrote?
  4. Ask ChatGPT who the best [your trade] in [your city] is. Then ask Google's Gemini. Note who comes back, and whether you do. Screenshot both.
  5. Check whether every city in your footer has a page behind it.
  6. Open your own site on your phone. Is your number tappable without scrolling?

Most of that takes under half an hour and none of it costs anything.

When you're ready to add interactive lead magnets, we build tools like these into contractor sites — see live demos on our Free Tools page: Roof Replacement Cost Calculator, Bathroom Remodel Estimator, and HVAC Replacement Cost Estimator.

For Dayton plumbers specifically, see website design and automation for plumbing businesses.

Frequently asked questions

Does any of this actually affect whether I get calls?

It affects whether you're findable in specific searches. It doesn't guarantee anyone calls. Any web company that promises you a ranking or a lead volume is telling you something they can't know — search results depend on your market, your competition, your reviews, and decisions made at Google that nobody outside Google controls.

Is AI search big enough to worry about yet?

For most trades, it's a small share of searches today. The reason to care now is that it's cheap to be early and expensive to catch up — and the same fixes that make you legible to ChatGPT also fix your Google listing, which is not a small share of anything.

My nephew built my site. Do I need to start over?

Usually no. Four of the seven sites here had solid foundations and wrong labels. That's a correction, not a rebuild. Rebuilding is for sites that can't work on a phone or sit on a platform that's shutting down.

How do I know if my site has schema markup?

Run your address through Google's Rich Results Test. It'll tell you what structured data it can find. If it finds nothing, that's common and it's fixable.

Why would you tell me how to check all this myself?

Because most of it you can do in an afternoon, and the owners who fix it themselves weren't going to hire anyone anyway. The parts that take real work — consolidating an identity spread across a dozen directories, building out service-area pages, adding structured data — are still there if you want help.

The point

None of these seven businesses had a bad website. They had good businesses with labels written for a different decade, back when the only thing reading them was a person who had already found you.

That's changed. The tools people use to find a contractor read the labels first now, and they don't look at the photos.

Reuben Lopez runs Lopez Web Design in Centerville, Ohio, building websites and search visibility for small businesses around the Miami Valley. The businesses referenced here are real and intentionally unnamed.

More Field Manuals

More practical field reports for business owners navigating their digital terrain.

The Web Design Blueprint for Dayton Handymen and Contractors

A no-fluff blueprint for trades and contractors: mobile-first sites that turn "near me" searches into booked jobs, built for owners who live on calls and referrals.

Read the Guide

Can ChatGPT Build Me a Website?

Yes, ChatGPT can write a website's code and copy. But it won't bring traffic, convert visitors, or match your vision without a real design process.

Read the Guide

Google Business Profile Optimization Checklist (2026)

A free, step-by-step Google Business Profile checklist for local businesses. What to fill out, what to avoid, and how to rank higher on Google Maps.

Read the Guide

Is Your Law Firm's Website an ADA Lawsuit Waiting to Happen?

ADA website lawsuits hit a 27% increase in 2025. See what actually protects your Ohio law firm, and why widgets and one-time fixes won't cut it.

Read the Guide

What Is a Fair Price for a Website? A 2026 Cost Breakdown for Dayton-Area Businesses

A fair price for a small business website is $2,500–$5,000 for most Dayton-area businesses. See real 2026 pricing by provider, site type, and monthly costs.

Read the Guide

The Hidden Costs of DIY Web Design: Is It Actually Cheaper?

The true cost of DIY website builders: domains, SEO, analytics, and why free tiers end up costing time and revenue.

Read the Guide

Building a Local E-Commerce Engine: How Dayton Shops Can Start Selling Online

How Dayton shops can start selling online: the four pillars (storefront, inventory, shipping, payments), real costs, and a playbook that fits how you already run your store.

Read the Guide

What a Custom E-Commerce Website Actually Costs in Dayton (No Games, No Surprises)

Real, flat-rate pricing for custom e-commerce websites in Dayton, Ohio. No hourly billing, no hidden fees, no retainer traps.

Read the Guide

The Digital Oil Change: Why Your Dayton Business Needs Regular Website Maintenance

Ongoing website maintenance as a local service. We handle security, backups, and performance for Dayton businesses so your site stays reliable while you run the job. Predictable care beats $3K+ emergencies.

Read the Guide

The Dayton Shop-Owner's Manual

Repair your Dayton online store: leaky checkouts, broken mobile shops, and affordable e-commerce fixes. Field guide for local retailers selling online in 2026.

Read the Guide

Want to know what search engines actually see on your site?

Start with a free personal AI report. We'll tell you straight what's there — and what needs fixing before the next call goes to a competitor.